Optimization of Supercritical CO2 Extraction of Moringa oleifera Seed Oil Using Response Surface Methodological Approach and Its Antioxidant Activity.

Moringa (Moringa oleifera) seed oil is an edible vegetable oil rich in unsaturated fatty acids. In this study, the supercritical CO2 fluid extraction method was employed to obtain the maximum yield of moringa seed oil. The effects of temperature, time, and pressure, three characteristics of extractions, on the extraction rate of Moringa seed oil were investigated by single factor test and response surface methodological approach. The optimal process conditions of supercritical CO2 fluid extraction of moringa seed oil were determined as extraction temperature of 45°C, extraction time of 2.5 h, extraction pressure of 50 MPa, and CO2 flow rate of 240 L/h, resulting in a maximum yield of 38.54%. Composition analysis shows that the extracted moringa seed oil is rich in unsaturated fatty acids, including oleic acid, octadecanoic acid, palmitic acid, stearic acid, eicosanoic acid, etc. Furthermore, we found that Moringa seed oil exerted potent antioxidant activities on DPPH and hydroxyl radicals, and its efficacy was comparable to commercial peanut oil and tea oil. Overall, this novel extraction method of moringa seed oil may increase its potential value and application in the food and nutraceutical industries.

Biodegradable, Flexible, and Transparent Conducting Silver Nanowires/Polylactide Film with High Performance for Optoelectronic Devices.

As a synthetic renewable and biodegradable material, the application of polylactide (PLA) in the green flexible electronics has attracted intensive attention due to the increasingly serious issue of electronic waste. Unfortunately, the development of PLA-based optoelectronic devices is greatly hindered by the poor heat resistance and mechanical property of PLA. To overcome these limitations, herein, we report a facile and promising route to fabricate silver nanowires/PLA (AgNW/PLA) film with largely improved properties by utilizing the stereocomplex (SC) crystallization between poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA). Through embedding the AgNW networks into the PLLA:PDLA blend matrix via a transfer method, the AgNW/PLLA:PDLA film with both high transparency and excellent conductivity was obtained. Compared with the AgNW/PLLA film, the formation of SC crystallites in the composites matrix could significantly enhance not only heat resistance but also mechanical strength of the AgNW/PLLA:PDLA film. Exceptionally, the AgNW/PLLA:PDLA film exhibited superior flexibility and could maintain excellent electrical conductivity stability even under the condition of 10,000 repeated bending cycles and 100 tape test cycles. In addition, the organic light-emitting diodes (OLEDs) with the AgNW/PLLA:PDLA films as electrodes were successfully fabricated in this work for the first time and they exhibited highly flexible, luminous, as well as hydrolytic degradation properties. This work could provide a low-cost and environment-friendly avenue towards fabricating high-performanced PLA-based biodegradable electronics.